{"id":77,"date":"2021-03-11T08:50:44","date_gmt":"2021-03-11T06:50:44","guid":{"rendered":"https:\/\/farbika.com.ua\/?p=77"},"modified":"2026-08-23T19:32:15","modified_gmt":"2026-08-23T17:32:15","slug":"epoksydna-nalivna-pidloha","status":"publish","type":"post","link":"https:\/\/farbanew.com.ua\/en\/epoksydna-nalivna-pidloha\/","title":{"rendered":"Epoxy Self-Leveling Floor"},"content":{"rendered":"
\n\n\n

Epoxy Self-Leveling Floor<\/strong> is a two-component coating based on epoxy resins, available in various colors.<\/p>\n\n\n\n

The material is a two-component, solvent-free and odorless epoxy self-leveling flooring compound.<\/p>\n\n\n\n

Appointment<\/h2>\n\n\n\n

Epoxy self-leveling floors are designed for areas exposed to high operational loads. The coating provides excellent resistance to mechanical and impact loads, abrasion, temperature fluctuations, alkalis, weak acids and other chemicals.<\/p>\n\n\n\n

It forms a seamless, dust-free coating.<\/strong><\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Main properties:<\/p>\n\n\n\n

    \n
  • high mechanical strength;<\/li>\n\n\n\n
  • high chemical resistance;<\/li>\n\n\n\n
  • excellent adhesion and wear resistance;<\/li>\n\n\n\n
  • water resistance and waterproofing properties;<\/li>\n\n\n\n
  • resistance to UV radiation;<\/li>\n\n\n\n
  • excellent decorative properties.<\/li>\n<\/ul>\n\n\n\n

    The epoxy coating provides excellent adhesion to various substrates, high wear and chemical resistance, hardness and strength.<\/p>\n\n\n\n

    It can be applied to concrete, rigid metal and wooden substrates<\/strong>, forming a thick protective layer resistant to mechanical and chemical loads.<\/p>\n\n\n\n

    Applications<\/h2>\n\n\n\n

    Epoxy self-leveling flooring is designed for areas exposed to high mechanical loads, intensive contact with liquids, as well as severe abrasive and chemical loads.<\/p>\n\n\n\n

    The chemical-resistant epoxy coating is suitable for industrial and commercial flooring, including:<\/p>\n\n\n\n

      \n
    • retail and manufacturing facilities;<\/li>\n\n\n\n
    • food and pharmaceutical facilities;<\/li>\n\n\n\n
    • childcare and medical facilities;<\/li>\n\n\n\n
    • warehouses;<\/li>\n\n\n\n
    • aircraft hangars;<\/li>\n\n\n\n
    • workshops;<\/li>\n\n\n\n
    • garages;<\/li>\n\n\n\n
    • outdoor parking areas;<\/li>\n\n\n\n
    • automotive repair shops.<\/li>\n<\/ul>\n\n\n\n

      Substrate Preparation<\/h2>\n\n\n\n

      The substrate must be clean, dry and structurally sound.<\/p>\n\n\n\n

      Before application, the surface should be ground to remove cement laitance and provide a stronger and more even substrate.<\/p>\n\n\n\n

      Substrate requirements:<\/p>\n\n\n\n

        \n
      • moisture content \u2014 not more than 4%<\/strong><\/li>\n\n\n\n
      • compressive strength \u2014 at least 20 MPa<\/strong><\/li>\n\n\n\n
      • pull-off strength \u2014 at least 1.5 MPa<\/strong><\/li>\n<\/ul>\n\n\n\n

        Before applying the self-leveling floor, prime the substrate with an epoxy primer until the pores are completely filled. Primer consumption is 250\u2013350 g\/m\u00b2.<\/strong><\/p>\n\n\n\n

        Where defects or significant surface irregularities are present, an epoxy putty<\/strong> filled with calcined quartz sand at 80\u2013120% by weight<\/strong> may be used.<\/p>\n\n\n\n

        Apply the self-leveling compound after the primer has completely cured \u2014 24 hours at +20 \u00b0C.<\/strong><\/p>\n\n\n\n

        Before applying the finish coat, grind the primed surface to improve adhesion. Alternatively, apply a thin layer of calcined quartz sand to the uncured, tacky primer. After curing, remove any loose sand with a vacuum cleaner.<\/p>\n\n\n\n

        Minimum application temperature: +5 \u00b0C.<\/strong><\/p>\n\n\n\n

        After transportation at low temperatures or when working in a cold room, Component A may be heated separately from Component B to +25...+30 \u00b0C.<\/strong><\/p>\n\n\n\n

        Application Procedure<\/h2>\n\n\n\n

        Pre-mix Component A<\/strong> using a low-speed drill with a mixing attachment for 2\u20133 <\/strong>minutes.<\/p>\n\n\n\n

        Then add Component B (hardener)<\/strong> to the pre-mixed Component A. Mix thoroughly using a low-speed drill \u2014 not more than 800 rpm<\/strong> \u2014 fitted with a paddle mixer for 3\u20135 minutes<\/strong>, avoiding air entrainment and ensuring that the mixture is completely homogeneous.<\/p>\n\n\n\n

        Pour the compound onto the surface and spread it to the required thickness using a squeegee or trowel<\/strong>.<\/p>\n\n\n\n

        Immediately after application, roll the coating with a spiked aeration roller<\/strong> to remove trapped air bubbles.<\/p>\n\n\n\n

        When walking over the freshly applied coating, use special spiked shoes<\/strong>.<\/p>\n\n\n\n

        Important:<\/strong> all mixing, application and spiked-roller operations must be completed within the material's working time of 25\u201330 minutes<\/strong>.<\/p>\n\n\n\n

        Clean tools with solvent immediately after use.<\/p>\n\n\n\n

        Drying Time<\/h2>\n\n\n\n
          \n
        • at +20 \u00b0C \u2014 1 day;<\/strong><\/li>\n\n\n\n
        • at +10 \u00b0C \u2014 2 days;<\/strong><\/li>\n\n\n\n
        • at +5 \u00b0C \u2014 3 days.<\/strong><\/li>\n<\/ul>\n\n\n\n

          Consumption<\/h2>\n\n\n\n

          The consumption of epoxy compound at a coating thickness of 1 mm is approximately 1 kg\/m\u00b2.<\/strong><\/p>\n\n\n\n

          Safety Precautions<\/h2>\n\n\n\n

          Apply the coating in a well-ventilated area.<\/p>\n\n\n\n

          Avoid contact with exposed skin. Protective gloves and safety glasses<\/strong> are recommended during application.<\/p>\n\n\n\n

          In case of eye contact, rinse immediately with plenty of water and seek medical attention.<\/p>\n\n\n\n

          Storage<\/h2>\n\n\n\n

          Store the material in tightly closed containers at temperatures from 0 to +30 \u00b0C.<\/strong><\/p>\n\n\n\n

          Do not heat. Keep away from fire and direct sunlight.<\/p>\n\n\n\n

          Component B (hardener)<\/strong> must be stored and transported at temperatures above 0 \u00b0C.<\/strong><\/p>\n\n\n\n

          Shelf life in the original manufacturer's packaging: 6 months from the date of manufacture.<\/strong><\/p>\n\n\n\n

          Application Tools<\/h2>\n\n\n\n

          The following tools are required:<\/p>\n\n\n\n

            \n
          • low-speed drill (not more than 800 rpm<\/strong>) with a suitable mixing paddle;<\/li>\n\n\n\n
          • trowel for spreading the material in hard-to-reach areas;<\/li>\n\n\n\n
          • adjustable squeegee for distributing the material evenly over the surface;<\/li>\n\n\n\n
          • spiked aeration roller for removing air bubbles;<\/li>\n\n\n\n
          • spiked shoes for walking on the freshly applied coating;<\/li>\n\n\n\n
          • solvent for cleaning tools.<\/li>\n<\/ul>\n\n\n\n

            Before applying the material, make sure that the substrate has been properly prepared and primed.<\/strong><\/p>\n\n\n<\/div>","protected":false},"excerpt":{"rendered":"

            Epoxy self-leveling floor is a two-component coating based on epoxy resins. Available in various colors. The material is a two-component solvent-free, odorless epoxy flooring compound.\n\nApplication\nEpoxy self-leveling floors are designed for use under high loads. The coating is resistant to mechanical and impact loads, abrasive wear, temperature fluctuations, alkalis, \u2026<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"ngg_post_thumbnail":0,"footnotes":""},"categories":[5],"tags":[],"class_list":["post-77","post","type-post","status-publish","format-standard","category-np","anons"],"_links":{"self":[{"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/posts\/77","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/comments?post=77"}],"version-history":[{"count":11,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/posts\/77\/revisions"}],"predecessor-version":[{"id":1378,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/posts\/77\/revisions\/1378"}],"wp:attachment":[{"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/media?parent=77"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/categories?post=77"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/farbanew.com.ua\/en\/wp-json\/wp\/v2\/tags?post=77"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}